Sal Saline Plant Features

ELECTROLYTIC CELLS: 4 years (1 years full warranty - 3 years prorate %)
RECTIFIER: 5 years (1 years full warranty - 4 years prorate %)
NB: PCV plumbing, flow switchs, valves, cell cables, electrical parts, cell o rings, cell head section, 1 year warranty on these parts only.

The Sal-Chlor Climax Global  Plant incorporates a number of sophisticated protection systems to protect the electrolytic cell and the rectifier against operator error, incorrect salt concentrations or system malfunction:

Water Flow Sensor cut off - Unit switches off if no water flow is detected. The paddle sensor is immersed in the water flow and utilises water pressure as the switching mechanism. The sensor employs the latest material technology to ensure protection against corrosion. Other systems available in the market rely on electrolytic sensors which sense the presence of water, rather than water flow. Such electrolytic sensors can enable hydrogen gas to build up to dangerous levels.

Electrical Interlocking with Filter Pump - The system will only operate when the filter pump operates, ensuring water flow to the plant.

Hydrogen Escape - The systems are engineered to prevent the build up of dangerous levels of hydrogen gas - a by-product of the electrolytic process.

Ammeter Over-current trip (optional) - The unit will switch off in the event of current settings being exceeded. Over-current detection is achieved by 2 separate systems. The first by electronic detection utilising pre-determined current settings on the ammeter, and the second through fuse protection.

Alarm - A visual alarm will activate in the event of system shut down. The option to connect a remote alarm situated outside of the plant room is available.

Thermal Cut-Off - Installation of electronic microtherrns will detect overheating and switch off the unit. A visual alarm will activate.

C Board - The unit's control logic device enables constant current or constant voltage regulation to the electrolytic cell. Once the current and voltage levels are set, the rectifier's output will not exceed these figures, notwithstanding a change in load conditions at the cell. For example, the addition of salt or other electrolytes or seasonal temperature variations will increase water conductivity (lowering resistance) and therefore draw greater current at the cell. Normally such circumstances would potentially result in excessive current to the cell beyond its rated design, thus significantly reducing cell life. The Sal-Chlor circuitry is basically an idiot proof, self diagnosing system. Power output automatically reduces or increases to match the pre-set levels.

The Sal-Chlor Climax Global  Plant produces Sodium Hypochlorite through a safe and simple process utilising water, common salt and electricity. The system does not store chemical chlorine, but rather, produces it on demand directly into the water. The system does not produce hazardous chemical by-products such as Caustic Soda attributable to Brine systems.

The Sal-Chlor SAL Saline Chlorination Plant is built to last, with built in safeguards to take into account the many variables encountered in field operation, including operator error. Variables, which on other systems, will reduce cell life and potentially result in costly repairs.

We refer you to the Sal-Chlor Standard/Optional Factory Equipment Schedule for further information on equipment accessories.