SPECIFICATION |
UNITS / FEATURES |
MODELS
|
The SAL Saline Chlorinators and Chlorination Systems consists of various modular units with variable chlorine production capacities. |
TYPE |
In-line - Commercial Hypochlorite Plant |
NO. UNITS |
Plant can be designed to comfortably meet chlorine production requirements with single rectifier/cell modular units. If system back up is required or desirable, systems can be designed to tolerate multiple cell shut-down without affecting the rest of the system. |
CHLORINE PRODUCTION |
From 50 grams per hour to 50 kilograms per hour or greater. |
SALT CONCENTRATION |
The system relies on the presence of salt in the water, ranging from seawater concentrations (3.5%) to as little as 5,500 ppm salt concentrations. |
WATER TREATMENT
VOLUME |
The pre-engineered range is designed to meet the chlorine requirements of any water volume or water flow rate. Where pre-engineered models are not suited to a particular application, units are tailor designed. |
RECTIFIER |
Designed to Australian Standards AS3108 & AS2374. |
Cabinet |
Thickness - 1.6mm |
|
Finish - Powder coated zinc anneal steel to 85 microns. |
Power Supply |
Up to and including 330 grams/hr - Single phase power supply. |
> 330 rams/hour - 3 Phase power is required. |
Single Phase |
3 Phase Rectification |
Primary Input Voltage |
110-240V |
415V |
RECTIFIER CONTROL |
- Transformers are tapped for world power variation. |
Equipment |
- Variable Chlorine Control |
|
- Ammeter (conventional) |
- Main Power On Switch |
- Rectifier Power On Switch |
- Primary & Secondary alarm |
- Lamps displaying: Power On, Rectifier On, Water Flow Fault, Temperature Alarm |
Soft Start Up |
For maximum cell protection the unit is fitted with thyristor controls, soft start auto voltage and amperage romping. |
Cooling System |
Air or Fan cooled (on larger units). |
ELECTRODE CELL(S) |
Type - Monopolar, solid 1.6mm solid plate electrodes. |
Material |
Cathode - Solid Titanium plate. |
Anode - Solid Titanium plate, coated with SC6 industrial quality coatings. |
Cell Cleaning |
Up to 330g/h Cl - Removal of cell and manual acid cleaning with mild acid solution, facilitated by acid cleaning chamber. |
Above 330g/h Cl - Provide a semi-automatic, manual valve operated acid wash system, incorporating pump, check valves and acid tank. |
Plumbing |
Pipes, fittings and valves - Industrial grade heavy walled PVC or CPVC. Factory tested to 400 kPa. Electrode Inspection facilitated by clear PVC inspection portal in cell chamber. |
Minimum Water Flow
|
The electrode cells require minimum water flow rates to ensure efficient heat transfer and maximum efficiency. Refer to Commercial Plant Specifications. |